Retrofit kit - moisture reduction

Description

The conversion is quite simple: 

1. Unscrew the activated charcoal filter from the bottom opening. 
2. Drill a new hole at the top near the lamp. 
3. Fit the activated charcoal filter in the top hole and run the cable down behind the fabric material. 
4. Place the cover on the bottom hole (it can be a little difficult to insert the cover, but it will be firmly in place afterwards). 
5. Seal the upper ventilation holes with the sticker. 

Now you no longer have to close the case completely. It is sufficient to close the zip at the top and on the side. At the bottom, it is sufficient for the case to lie end to end, as fresh air is now drawn into the case from below and pulled out again at the top.

Scope of delivery: 

• Cover (for the old hole at the bottom) 

• Stickers to seal the ventilation holes at the top 

• Cable tie 

• Hole saw 75 mm (not included in the set, approx. 9 € at Amazon)